Technical specifications of our Legend 36EXT. The 36EXT is a legacy system of Epilog Laser. See specifications on this unit below.
雕刻面积 | 36" x 24" (914 x 610 毫米) |
|
最大材料厚度 | 12" (305 mm) | |
Maximum Material Thickness with Table Revmoved | 14" (355 mm) | |
激光机功率 | 30、40、50、60、75 或 120 瓦 | |
激光光源 | 先进的、数字控制的、用空气冷却的 CO2 激光管是完全模块化的,永久免校正并且可现场更换。 | |
智能内存缓冲 | 可存储的文件数量不受限制,最多 64 MB。 滚动缓冲允许雕刻任何大小的文件。 | |
Permanent Job Save at the Laser | Store up to 10 jobs at the laser, each up to 2 MB in size. | |
空气辅助装置 | 将空气压缩机连接到我们附带的空气辅助装置,将持续的压缩空气气流吹向切割表面,从而减少切割表面产生的热量和可燃气体。 | |
Laser Dashboard | The Laser Dashboard controls your Epilog Laser's settings from a wide range of software packages - from design programs to spreadsheet applications to CAD drawing packages. | |
红点指针 | 由于激光束是不可见的,因此 Epilog 激光系统上的红点指针让您可以直观地看到激光机将在何处发射。 | |
可重新定位的起始位置 | 如果雕刻的物体不太容易放到激光机顶部的角落,您可以使用 Legend 系列激光机上方便的“可移动起始位置”功能,手动设置一个新的起始位置。 | |
操作模式 | 经过优化的栅格、矢量或组合模式,可在一个作业中完成雕刻和切割。 | |
运动控制系统 | High-speed, continuous-loop, DC brushless servomotors using linear and rotary encoder technology for precise positioning. | |
X 轴轴承 | Ground and polished stainless steel long-lasting bearings. | |
打印界面 | 10 Base-T Ethernet or USB connection. Compatible with Windows XP/Vista/7. | |
尺寸(宽 x 深 x 高)) | 50.5" x 33" x 42" (1283 x 838 x 1067 mm) - (120 watt: 36"/914 mm deep). | |
重量 | 440 lbs (199 kg) | |
电气要求 | 自动切换电源可适应 110 到 240 伏特、50 或 60 Hz 单相。 | |
Super-Silent Cooling Fans | 64 db (not available on the 120 watt). | |
通风 | External exhaust to the outside or internal filtration system required. There are two output ports, each 6" in diamter. | |
激光系统分类 | 2 类激光产品 - 1 mW CW 最大 600-700 nm。 |