Open the file and adjust the settings on the General tab with your settings accordingly. If you are using a dual-source laser, set your CO2 engraving settings on the General Tab. Set your machine type to CO2, turn on Auto Focus, and enter the thickness of the wood handle. Change your speed and power to settings for wood.
Utilize the Color Mapping feature if you are using a Dual-Source Fusion M2 to mark the metal. Measure the metal opener thickness by measuring from the table to the top of the metal. For our example, the metal’s height is 0.326”.
Use the template vector outline to trace the object with the Red Dot Pointer with the door open. This will ensure proper alignment. Once you are confident in the placement of your graphic, remove the vector box and send the job to the laser and press go! If you would like to mark the metal but do not yet own a Dual-Source M2, you can create a beautiful mark with a C02 laser by applying CerMark to metal prior to engraving.
中国、中国澳门、广州、北京和中国香港： East Systems Technology, LTD. Daniel Chow Rm A2, 25/Fl, Block 1, Tai Ping Industrial Centre 57 Ting Kok Road Tai Po, N.T., Hong Kong 852-31561139 Phone 852-81004530 Fax Email: Send a message More Information